Usingyourphone; Making And Receiving Calls - Uniden XCA750 Operating Manual

If the Base Unit loses power while the Handset is off the Base, the Digital
Code may be erased. When this happens, the Handset will not function. To
reestablish communication between the Handset and Base Unit:
1. Restore power to the Base
Unit.
2. Place the Handset back on
the Base Unit.
The charge LED will blink
3.
quickly, indicating that the
Digital Code has been reset.
29

Making and Receiving Calls

The following features of the XCA650/XCA750 phone are different
depending on the Handset's Location when you make or receive a call.
Pick up Handset
ANSWER
(AutoTalk)
CALL
1) Pick up Handset
2 )
MAKE CALL
3)
4) Dial the number
Press @
I! HANG
UP
Return Handset to Base
(AutoStandby)
1) Pickup Handset
2) Press @
REDIAL
3)
4) Press @
Note: Sometimes when you press @ to hang up the phone, you may get
an error tone and the phone will not disconnect. If this happens,
place the Handset on the Base Unit or press @ again while
holding the Handset close to the Base Unit.
Using Your Phone
HANDSET ON
BASE
Press speaker button on the
Base Unit.
Listen for dial tone Handset to make a call.
Press speaker button on the
Base Unit.
Listen for dial tone
Handset to make a call.
30
OFF