Section 1
Introduction
1.4.3
6
To navigate between the options, use
•
HMI menu paths are presented in bold.
Select Main menu/Settings.
•
LHMI messages are shown in Courier font.
To save the changes in non-volatile memory, select Yes and press
•
Parameter names are shown in italics.
The function can be enabled and disabled with the Operation setting.
•
The ^ character in front of an input or output signal name in the function block
symbol given for a function, indicates that the user can set an own signal name
in PCM600.
•
The * character after an input or output signal name in the function block
symbol given for a function, indicates that the signal must be connected to
another function block in the application configuration to achieve a valid
application configuration.
Functions, codes and symbols
Table 1:
Functions included in PML630
Functionality
Control
Double point indication
Monitoring
Station battery supervision
Generic measured values
Single point indication
Power management
Critical circuit breaker
Contingency based fast load shed
Sheddable load trip
Busbar with sheddable load
Network power source
Subnetwork output
Disturbance recorder function
Disturbance recorder
Analog channels 1-10 (samples)
Analog channel 11-20 (samples)
Analog channel 21-30 (samples)
Analog channel 31-40 (calc. val.)
Binary channel 1-16
Table continues on next page
and
.
IEC 61850
1)
DPGGIO
1)
SPVNZBAT
1)
MVGGIO
1)
SPGGIO
NCBDCSWI
LSCACLS
LSPTRC
LDMMXU
PWSMMXU
SNWRCLS
1)
DRRDRE
A1RADR
1)
1)
A2RADR
A3RADR
A4RADR
B1RBDR
1MRS757261 C
.
PML630
Point List Manual