Advertisement
CAUTION: Epoxy and Trespa table tops are heavy and can be very heavy depending on the overall size. Be
sure there are enough people lifting the table tops during the installation process to avoid injury.
IAC Lab frames a table tops are designed to have the following overhangs:
For 24" deep table tops going on a 24" deep frame the side overhang is 2", the rear overhang is 1".
For 30" deep table tops going on a 30" deep frame the side overhang is 2", the rear overhang is 2 ½".
For 36" deep table tops going on a 36" deep frame the side overhang is 2", the rear overhang is 4 ½".
It is a good idea to tape, or somehow mark the underside of the table top with these dimensions in order to
make is easier to install the table tops properly.
36"
30"
24"
These dimensions can be very important depending on the type options ordered or to be retro-fitted to the
table frames at a later date.
8
Advertisement
