Summary; Features - Sony LT20 Series Instruction Manual

2. Summary

The display unit LT20 series is designed to be incorporated
into assembly lines or jigs, and to be used for measuring
components or Go/No Go.
Use in combination with a DG, DL series measuring probe.
Types are available to suit various uses.
Number of
Model
input channel
LT20-101
LT20-101B
LT20-101C
LT20-201
LT20-201B
LT20-201C
44
Output
Go/No Go BCD RS-232C
◯ ◯ ◯ ◯ ◯
◯ ◯ ◯ ◯ ◯
◯ ◯ ◯ ◯ ◯
1
◯ ◯ ◯ ◯ ◯
◯ ◯ ◯ ◯ ◯
◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◯
2
◯ ◯ ◯ ◯ ◯

2-1. Features

• Compact size suited to inclusion in systems.
DIN size (72 × 72 mm). Can be panel-mounted.
• Connectable to various other devices.
Go/No Go output is standard to all models. Models
capable of BCD and/or RS-232C also outputs are
available.
• Resolution
◯ ◯ ◯ ◯ ◯
Input signal Resolution:
0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mm selectable
Display resolution:
◯ ◯ ◯ ◯ ◯
0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mm
(0.00002", 0.00005", 0.0002", 0.0005") selectable
• As well as the current value, maximum and minimum
values and peak-to-peak values can also be measured.
• Add/Sub calculation is standard feature (only for 2
channel models).
Can measure the widths or steps.
• Can carry out Go/No Go test on different lots. (BCD
output models.)
Four different upper and lower limits can be stored in
memory for the Go/No Go comparison.
• Power is compatible to DC 12 to 24V.
Provided via the terminals.