Levelling The Appliance; Turning On The Power; Moving The Appliance For Relocation - LG GBB940DFQZT Owner's Manual

EN 12 INSTALLATION
Inserting the Stoppers
Insert the stoppers to the upper edge on the rear
plate of the appliance. The stoppers are supplied
with the kit in the appliance.
NOTE
• Stoppers should be inserted to reduce the
electricity consumptionget in operation of the
appliance.

Levelling the Appliance

Adjusting the Levelling Leg
If the appliance seems unsteady, or the doors do
not close easily, adjust the appliance's tilt using the
instructions below.
1
Turn the levelling leg clockwise to raise that
side of the appliance or counterclockwise to
lower it.
2
Open the doors and check to make sure that
they close easily.

Turning on the Power

Connecting the Appliance
After installing the appliance, connect the power
plug into the outlet socket.
NOTE
• After connecting the power supply cord (or plug)
to the outlet, wait 3 or 4 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.
Moving the Appliance for
Relocation
Preparing for Relocation
1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into the
power plug hook at the rear or on top of the
appliance.
3
Tape parts such as shelves and the door handle
to prevent from falling off while moving the
appliance.
4
Move the appliance with more than two people
carefully. When transporting the appliance
over a long distance, keep the appliance
upright.
5
After installing the appliance, connect the
power plug into a mains outlet socket and
switch it on.