Table of Contents
Advertisement
1.
Introduction
Overview
1.1.
The SLCD+ controller provides complete Graphical User Interface for embedded systems
using QVGA or smaller LCD panels. Using the SLCD is simply the quickest way to
generate a user interface without a lot of graphical programming. It has a small size to fit in
space-constrained applications.
Features
1.2.
Drives either active (TFT) and passive (STN) displays
Touch controller (4 wire resistive) on board
Beeper for audible touch feedback and alarms
3" by 4.5" size, only 0.2" thick
Low power (40mA typical at 5V)
RS232 or TTL level interface up to 115200 baud
User downloadable bitmaps with RLE compression (4MB of flash memory)
Backlight enable and brightness control
Reasonable cost
Supports either landscape or portrait mode display (firmware option)
Can be modified for specific OEM requirements
RoHS Compliant as of Jan 1, 2007
SLCD+ Controller Manual V1.1
8/14/2009
Page 8
Advertisement
Table of Contents
