J12 - 4 Wire Touch; J11 - 4 Wire Touch; J2A - 4 Wire Touch - Reach Technology SLCD+ Manual

J12 - 4 Wire Touch

3.4.
J12 4 Pin Molex 52271-0469 or equivalent 1mm pitch bottom
contact Zero-Insertion-Force Connector
Pin Signal
1 X1 (left / right / up / down)*
2 Y1 (up / down / left / right )*
X2 (right / left / down / up )*
3
4 Y2 (down / up / right / left )*
* The sense of X and Y and up / down / right / left is determined by
the touch calibration procedure – see "tc" command in the SLCDx
Software Reference Manual.

J11 - 4 Wire Touch

3.5.
J11 4 Pin Molex 39-51-3043 or equivalent 1.25mm pitch top
contact Zero-Insertion-Force Connector
Pin Signal
1 X1 (left / right / up / down)*
Y1 (up / down / left / right )*
2
3 X2 (right / left / down / up )*
4 Y2 (down / up / right / left )*
* The sense of X and Y and up / down / right / left is determined by
the touch calibration procedure – see "tc" command in the SLCDx
Software Reference Manual.

J2A - 4 Wire Touch*

3.6.
J12 4 Pin Molex 22-05-3041 or equivalent 0.1" pitch 0.025" square post
right angle friction latch Connector
Pin Signal
X1 (left / right / up / down)*
1
2 Y1 (up / down / left / right )*
3 X2 (right / left / down / up )*
4 Y2 (down / up / right / left )*
* Normally not provided.
SLCD+ Controller Manual V1.1 8/14/2009 Page 14