Advertisement
1
Pour the entire contents of the SAE 10W 30 oil
bottle (supplied) into the oil fill. Check the oil level
by inserting the dipstick (not threading it) into the
oil fill. (Refer to the Operator's Manual)
2
Fill tank with fresh gas to within 1/2-inch of top
of tank. Do not overfill. Do not use E85 or fuel
containing more than 10% Ethanol.
© 2018 12XVB2AQXXX
CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
and FOLLOW THE important SAFE OPERATION PRACTICES BEFORE OPERATING.
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
Oil Fill
Fast Start Guide - Engine Start
Gas Cap
Fuel Valve
Spark Plug
Boot
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569
Make sure the spark plug boot is connected to
the spark plug before attempting to start.
Rotate the fuel valve into the Open position.
While standing behind the machine, pivot the Blade
Control Handle against the upper handle.
Grasp the starter rope handle and pull with a quick,
full-arm stroke.
3
4
5
778-16200A
Advertisement
