GE 19 Series Use And Care Manual page 18

PROBLEM
HOT AR FROM
REFRIGERATOR
DOOR NOT CLOSING
PROPERLY
FOOD OR
FRESH
FREEZER COMPARTMENT
TEMPERATURE
TOO WARM
FOODS DRY OUT
FROST OR ICE
CRYSTALS ON
FROZEN FOOD
SLOW ICE CUBE
ICE CUBES HAVE
AUTOMATIC
ICEMAKER
DOES NOT WORK
(on some models)
CUBE DISPENSER
DOES NOT WORK
(on some models)
18
PROBLEM SOLWR
(continued)
POSSIBLE CAUSE
be expelled in the area under the refrigerator, Some floor coverings will discolor
at these norrn~ and safe operating temperatures. Your floor covering supplier
should be consulted if you object to this discoloration.
amount of petroleum jelly on face of gasket.
Temperature control not set cold enough. Refer to Temperature Control section.
Warm weather-frequent door openings.
Door left open for long time,
Package may be holding door open.
Foods not covered, wrapped or soled properly,
* Door may have been left ajar or package holding door open.
Door may have been left open.
Turn temperature of freezer compartment colder.
Ice storage bin needs to be emptied and washed.
* Unsealed packages in refrigerator andor freezer compartments may be
Interior of refrigerator needs cleaning-refer to Care and Cleaning section.
Poor-tasting incoming water. Instrdl a water filter-see Water Filter
Accessory section.
ON-STOP control h STOP (up) position.
Water supply turned off or not connected.
Freezer compartment too warm.
. Cubes too small—water shutoff v~ve connecting refrigerator to home
water line may be clogged.
Sometimes cubes fuse to the side of the ice mold and hold the feeler arm in the
STOP (up) position. Remove MS ice to restart the icemaker.
When reaching for cubes by hand, you may have pushed the feeler arm into the
STOP (up) position by mistake.
Piled up cubes in storage bin may cause icemaker to shut off too soon. With
icemaker feeler arm in STOP (up) position, level cubes in bin.
remove cubes.
Irregular ice clumps in storage container, Breti up as many as you can with
fingertip pressure and discmd the remaining clumps.