Using Keylock; Using The Display Backlight - Uniden UBC92XLT Owner's Manual

UB324 Paper OM reduced size.fm Page 40 Wednesday, February 2, 2005 8:01 PM
2. Press Func + Pgm, then press Func + Pri.
P
appears to the left of the selected channel
number.
3. Repeat Steps 1 and 2 for the channel in each
bank you want to program as a priority channel.
To turn on the priority feature, press Func + Pri
during scanning. PRI appears. Then the scanner
checks the designated priority channel every
2 seconds in each bank.
To turn off the priority feature, press Func + Pri. PRI
disappears.

Using Keylock

Use the scanner's keylock to protect it from
accidental program changes. When the scanner's
keys are locked, the only controls that operate are
Scan, Func, Hold,
To turn on keylock, press Func +
appears. To turn off keylock, press Func +
disappears.
Note: Using keylock does not prevent the scanner
from scanning channels.

Using the Display Backlight

To turn on the display light for easy viewing at night,
press . The display lights for 15 seconds. To turn
off the light sooner, press
, , and .
.
again.
Special Features
40
.