Chain Search Mode - Uniden UBC92XLT Owner's Manual

UB324 Paper OM reduced size.fm Page 32 Wednesday, February 2, 2005 8:01 PM
BAND PLAN 2
Bank Frequency (MHz)
No.
1 25.0000 - 84.0100
2 84.0150 - 87.2550
3 108.0000 - 136.9875
108.0000 - 136.9916
4 137.0000 - 143.9950
5 144.0000 - 145.9875
6 146.0000 - 173.9900
7 406.0000 - 449.99375
8 450.0000 - 469.9900
9 470.0000 - 512.0000
10 806.0000 - 960.0000
See page 8 for how to switch the band between 1
and 2.

Chain Search Mode

Press Func + Src to start chain search mode. SRCH,
the enabled search bank number, and
(indicating the search direction) appear. The search
bank number being searched flashes.
Press 0-9 to enable or disable the search bank
number being searched in this mode. Enabled bank
numbers appear. (Disabled bank numbers
disappear).
At least one search bank must be enabled. (The
scanner sounds an error tone if you try to disable all
the search banks). The search bank and the
frequency where chain search starts depends on
Step (kHz)
5
20
12.5/8.33
Selectable
5
12.5
10, 12.5
6.25
10
6.25
12.5
or
Special Features
32