Using Keylock; Using The Display Backlight - Uniden UBC93XLT Owner's Manual

3. Repeat Steps 1 and 2 for the channel in each
bank you want to program as a priority channel.
To turn on the priority feature, press Func + Pri
during scanning. PRI appears. Then the scanner
checks the designated priority channel every
2 seconds in each bank.
To turn off the priority feature, press Func + Pri. PRI
disappears.

Using Keylock

Use the scanner's keylock to protect it from
accidental program changes. When the scanner's
keys are locked, the only controls that operate are
Scan, Func, Hold,
, , and .
To turn on keylock, press Func + .
appears. To turn off keylock, press Func +
.
disappears.
Note: Using keylock does not prevent the scanner
from scanning channels.

Using the Display Backlight

To turn on the display light for easy viewing at night,
press . The display lights for 15 seconds. To turn
off the light sooner, press again.
Special Features
46