Controlsandlndicators - Uniden Bearcat UBC 120XLT Operating Manual

----
<::
Controls and Indicators
D@QO
PHONE SQUELCH VOLUME
Top View
Conneqt the rubber antenna to this BNC
connector and turn clockwise until it locks.
SQUELCH
Control
Plug the supplied earphone into this jack for
private listening. When the earphone is
connected, the internal speaker is
isconnected.
No the warning on the Inside Front Cover
and on e 11
.
Adjust this co I to set the scan threshold
and to eliminate tl1 ackground rushing
noise heard in the abse
6eRf
a.n in.coming
signal. See the Operation SeCtiooJor
adjustment procedure. ~~..~
Use this control to turn the scanner on or~...
and to adjust the volume.
ON-OFF!
VOLUME
Control
Front View
(Refer to the foldout illustration inside the Back Cover)
Complete explanations of the use of these keys are in the
Scanning section, page 16, and Searching section, page 20.
1. LCD DISPLAY - The liquid crystal display
(LCD)
shows the current channel and frequency. It also
displays the mode, status, and bank indicators.
A. Scan Type
Indicator
-
Indicates BANK Scan
operation.
Channel Number
-Indicates the current channel
that the .scanneris on.
B.
6