Operation Controls and Functions - Front Panel
1.
HDMI IN:
This slot is where you plug your input
source equipment with HDMI cable
for source signal sending.
2.
DC 5V:
This slot is where you plug the 5V
DC power supply into the unit and
connect the adaptor to an AC wall
outlet.
Rear Panel
1.
SERVICE:
Use a D-Sub (RS232) to 3.5mm
(phone jack) cable to perform the
software upgrade
2.
ARC OPTICAL OUT:
Optical digital out for testing the ARC
function of a TV connected to the
HDMI. Connect to the optical digital
input of an audio system (such as an
AV receiver) to monitor the audio
output of the attached sink device.
3.
HDMI OUT:
The HDMI output connects the
Analyser to a Sink or Source device
to enable testing and checking the
capabilities of the system.
1
2
5
2
3
1