Memory Retention Feature; Full Warning; Audio Alert Only Operation - Uniden LRD 737 Operating Manual

Uniden radar detector operating guide lrd 737

Table of Contents

Memory Retention Feature

The Memory Retention Feature retains the LRD737's operational settings

in memory for at least 2 days without power. When you turn on the

LRD737, it will be in the same mode as when you turned it off.

When the LRD 737 detects a radar, laser, or safety warning signal, it

emits a distinct warning tone and the corresponding alert LEDs

( R, L/L2, or SWS ) will light and blink. The blink rate of the LEDs increases

and the signal strength meter LEDs light successively as the signal source

comes closer.

Press the audio button for Audio Alert Only operation.

When Audio Alert Only is selected, the visual alert and signal strength

meter are disabled. In this mode, all lighted LEDs will dim. Press the

audio button again for the Full Alert (audio and visual) Mode.

(Do not set the volume control at minimum when in Audio Alert Only

because there will be no alert.)

Note: The audio alert tones for the 3 radar bands, 2 laser systems and

Safety Warning System are all different.

Table of Contents