Specifications - Uniden HH955 Operating Manual

SPECIFICATIONS

General
Channels
Frequency
Frequency Tolerance
Operating Temperature
Antenna
Microphone
Channel Display
Speaker
Power Source
Size (without antenna)
Weight (with battery & antenna)
Transmitter
Frequency Range
Frequency Stability
Power Output
Spurious Emissions
Current Drain
Receiver
Receiver Type
Frequency Range
Sensitivity
Squelch Sensitivity
Audio Frequency Response
Adjacent Channel Selectivity
Hum & Noise Ratio
Audio Output Power
Current Drain
Specifications shown are typical and subject to change without notice.
Transmit
Receive
Phase Locked Loop (PLL)
Transmit
Receive
+14 F(-10 C) to + 131 F (+55 C)
Flexible Whip
Built-in Electret Type
Liquid Crystal Display
8 1Watt
9AA Batteries
(Alkaline or rechargeable NiCad)
167mm H x 47mm D x 60mm W
0.47Kg
156.025 ~ 157.425MHz
+ -
1.5KHz @ -10 to +55 C
High
Low
5W
High
Low
Dual conversion super Heterodyne
Phase locked Loop system for
Local Oscillator.
156.300 ~ 162.025MHz
0.3 V for 20dB SINAD (Nominal)
Threshold 0.4 V (Nominal)
+ 3dB to + 7dB @ 500Hz
- 9dB to - 5dB @ 200Hz
72 dB @ 25 kHz (Nominal)
45 dB (Nominal)
(10% THD) 0.7w (Nominal)
Squelched
Audio
11
54
54
0.001%
0.001%
5 Watts
1 Watt
-40dBm (Nominal)
1.3 Amp (Max.)
1.1 Amp (Nominal)
0.7 Amp (Max.)
0.6 Amp (Nominal)
+ -
60 mA (Nominal)
0.3 w output
140 mA (Nominal)
Max. output
210mA (Nominal)