Disconnect Optical Ports From The Network; Maintain Transceivers And Optical Cables; Verify Chassis Installation - Cisco 8200 Series Hardware Installation Manual

Connect Router to the Network

Disconnect Optical Ports from the Network

When you need to remove fiber-optic transceivers, you must first remove the fiber-optic cables from the
transceiver before you remove the transceiver from the port.

Maintain Transceivers and Optical Cables

Refer to
processes for fiber optic connections.

Verify Chassis Installation

After installing the chassis, use the following show commands to verify the installation and configuration in
the EXEC mode.If you detect any issues, take corrective action before making further configurations.
Command Description
show platform Displays the operational status of the node.
show inventory Displays information about the field replaceable units (FRUs), including product IDs, serial numbers,
and version IDs.
show environment Displays all the environment-related router information.
Inspection and Cleaning Procedures for Fiber-Optic Connections
Disconnect Optical Ports from the Network
document for inspection and cleaning
Hardware Installation Guide for Cisco 8200 Series Routers
35