Table of Contents
Advertisement
3.9.2
Editing Data Panels
You can change the layout of the overlaying data panels.
Select Edit Overlays > Data and make a selection:
• Top Bar displays 6 data on the top of the screen.
• Double Top Bar displays 8 data in 2 rows on the top of the screen.
• Corners displays 4 data at the corners of the screen.
• Double Corners displays 8 data at the corners of the screen.
• None hides all data panels from the screen.
Replacing Data
To display a different data:
1 Press [FOCUS] and highlight the data box you wish to replace.
2 Press [SELECT] and select the data you wish to display.
3.10 Settings
Settings below are for system-wide settings, device and software information, user
preferences, and vessel information.
3.10.1 System Settings
Press [MENU] > System to adjust system-wide settings.
• Select Sounds and Display to adjust Beeper, Backlight, and Color Mode.
• Select GPS to view satellite information and adjust satellite settings.
• Select System Information to view device and software information.
• Toggle Auto Power Up to set the device to power on automatically or not when your
vessel powers on.
Resetting to Default Settings
Select System Information > Reset > Reset Default Settings to restore the device to
factory default settings.
56
Menu
System
Settings
Sounds and Display
System
GPS
Preferences
System Information
Communications
Auto Power Up
0�55
m
Simulator
My Vessel
h
EBL 1
357
Data Management
G
836
f
t
Installation
180
EBL 2
58�8
G
VRM 2
0�39
m
i
CHAPTER 3 MENU AND SETTINGS
>
>
On
Advertisement
Table of Contents
