Table of Contents
Advertisement
3.6
Radar Appearance
Press [MENU] > Appearance in radar modes to customize the appearance of your radar
display.
NOTE: The menu is specific to Professional, Basic, Dual Range, and Radar Overlay
modes.
3.6.1
Changing the Colors
You can change how echoes are displayed on the radar screen.
• Select Color Scheme and select one of the color schemes.
• Select Echo Color to switch between Multi and Mono color mode. In Mono color mode,
the echoes and echo trails will all be in one single color.
3.6.2
Adjusting the Brightness of the Bearing and Range Lines
You can change how visible the bearing or range lines appear on the radar display.
1 Select Brightness and select Heading Line, Range Rings, or VRM/EBL.
2 Use the main knob to increase/decrease the visibility of the selected lines.
3 Press [SELECT] to confirm the brightness setting.
3.6.3
Looking Further Ahead
You can set the whole radar display to automatically shift toward the bottom of the
screen as you accelerate, increasing your awareness to the situations ahead of your boat.
Select Look-Ahead Speed to toggle the setting on/off.
With Look-Ahead Speed toggled on, select Change Speed and enter your top speed.
3.6.4
Selecting On-Screen Data
You can show or hide individual elements on the screen.
• Select Heading Line to show/hide the heading line.
• Select Range Rings to show/hide the range rings.
• Select Bearing Ring to show/hide the bearing ring.
• Select PI Lines to show/hide the PI lines.
• Select VRM/EBL 1 / VRM/EBL 2 to show/hide the VRM/EBL.
• Select Boundaries to show/hide the boundaries (see 3.5.3).
52
Menu
Radar Appearance
Radar Setup
Color Scheme
Echo Tuning
Echo Color
Other Vessels
Brightness
Alarms
Look-Ahead Speed
Navigation Info
Change Speed
Appearance
Heading Line
Settings
Range Rings
Bearing Ring
System
PI Lines
Preferences
Communications
Adjust PI Lines
Red
Multi
>
North
CHAPTER 3 MENU AND SETTINGS
Advertisement
Table of Contents
