Layout And Items Supplied - EINHELL GH-BC 33-4 S Original Operating Instructions

or fire.
•
Do not use any other cutting tools. For your
own safety you must use only the accessories
and attachments which are listed in the ope-
rating instructions or which are recommended
or specified by the manufacturer. The use of
cutting tools or accessories other than those
recommended in the operating instructions
or catalog may place your personal safety at
risk.
Safety precautions for handling the blade
•
Take not of all warnings and instructions rela-
ting to operating and fitting the blade.
•
The blade can recoil suddenly from objects
if it cannot cut or mow through them. This
can cause injuries to the arms or legs. Keep
bystanders and animals at least 15 m away
from where you are working. If the equip-
ment strikes a foreign body, stop the engine
immediately and wait for the blade to come
to a standstill. Check the blade for signs of
damage. Always replace the blade if it is bent
or cracked.
•
The blade is liable to catapult away objects
with high force. This can cause blindness or
injuries. Wear protection on your eyes, face
and legs. Always remove objects from your
working area before you use the blade.
•
Carefully check the equipment and its fittings
for signs of damage every time before use.
Do not use the equipment unless all the blade
fittings are installed correctly.
•
When you release the throttle lever, the blade
will continue to rotate and will only gradually
come to a standstill. A blade which is in the
process of rotating to a standstill can cause
you or bystanders injuries through cutting.
Before you start any work on the blade, switch
off the engine and ensure that the blade has
come to a standstill.
•
The danger zone has a radius of 15 meters.
Bystanders may suffer blindness or injuries.
Keep a distance of 15 meters between your-
self and other people or animals.
Anl_SA_GH_BC_33_4_S_SPK8.indb 24 Anl_SA_GH_BC_33_4_S_SPK8.indb 24
GB

2. Layout and items supplied

2.1 Layout (Fig. 1-14)
1. Connecting piece for long handle
2. Long handle
3. Steady grip
4. Starter cable
5. Choke lever
6. Petrol tank
7. Fuel pump "primer"
8. Ai r fi lter housing cover
9. On/Off switch
10. Throttle lever lock
11. Throttle lever
12. Throttle lock
13. Line spool with cutting line
14. Cutting line guard hood
15. Cutting blade guard hood
16. Cotter pin (2x)
17. Carrying strap
18. Cutting blade
19. Holder for steady grip
20. Handle screw M8
21. Protective cap
22. Carrier plate
23. Pressure plate
24. Pressure plate cover
25. Nut M10 (left-hand thread)
26. Filling bottle
27. Spark plug wrench
28. Open-ended spanner 8/10 mm
29. Allen key size 4 mm
30. Allen key size 5 mm
31. Screwdriver
32. Cable tie (2x)
33. Support plate
34. Screw (2x)
35. Air fi lter
36. Spark plug boot
37. Handle screw M6
38. Oil fi ller screw
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
- 24 -
11.05.16 09:02 11.05.16 09:02