UHF CB - OPERATION
TO OPERATE IN DUPLEX MODE (REPEATERS)
The Duplex function enables you to access local repeater stations. You can only activate Duplex from CH01-CH08.
UHF CB Repeaters are used to retransmit or relay your signal.
Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions.
Contact a retailer for a list of repeaters available in your area.
Operation with the aid of a Repeater
To turn DUPLEX ON/OFF:
1. Select the channel of the repeater in your area (CH01 - CH08).
2. Press & hold
.
MENU
3. Scroll
to highlight DUPLEX.
4. Press
.
ENT
5. Press
or
to select ON or OFF as desired.
6. Press
to confirm selection.
ENT
'DUPLEX' will appear when a duplex channel is used only if duplex is turned ON.
If DUPLEX is selected from the MENU options when the channel is not from
CH01 - CH08, an error tone sounds.
9