To Operate In Duplex Mode (Repeaters); Power Save - Uniden UH35 Series Owner's Manual

Operation

To Operate in Duplex Mode (Repeaters)

The Duplex function enables you to access local repeater stations. You can
only activate Duplex from CH01-CH08 and CH41-CH48. UHF CB Repeaters
are used to retransmit or relay your signal. Repeaters will extend the range of
your radio and overcome the shielding effect caused by solid obstructions.
Contact your retailer for a list of repeaters available in your area.
NOTE
Operation With the Aid of a Repeater
Eg. CH1 is being used in your area for repeater use.
Press momentarily. appears for CH01-CH08 and
appears for CH41-CH48 when duplex is selected.
Press again to deactivate the duplex operation.
UH35 Series will return to normal operation.

Power Save

Your UH35 Series has a unique circuit designed to dramatically extend the
life of the batteries. If there is no transmission nor an incoming call within 3
seconds, your Radio switches to the Power Save mode. The Radio is still
able to receive transmissions in this mode.
7
UNIDEN UH35 Series UHF CB Transceiver