Canon WFT-E9 Advanced User's Manual page 43

4.
Select the desired encryption setting.
For encryption, select [AES].
Select [OK] to display the next screen.
When [AES] is selected, the [Password] screen is displayed. Press
< > to display the virtual keyboard (
key. After entering the SSID, press the <
5.
Select the IP address setting.
To set the IP address automatically, perform step 1 in
Address Automatically.
To set the IP address manually, perform steps 1 to 4 in
Address Manually.
When the settings are complete, the next screen is displayed.
6.
Select [OK].
The next screen is displayed.
), then enter the encryption
43
> button.
Setting the IP
Setting the IP