Canon WFT-E9 Advanced User's Manual page 132

Preparing the Receiver Cameras
Configure settings on the camera used as the receiver.
1.
Perform Step 1 through 6 for "Preparing the Sender Camera".
2.
Select [Receiver].
3.
Select [OK].
Select [OK] to proceed to the next screen.
The following screen is displayed.
To use more than one receiver camera, repeat Step 2 and 3 for all the
receiver cameras.
Once setup is complete, no more receiver cameras can be added. You
need to configure the settings again starting from Step 1.
The sender camera's monitor displays the number of receiver cameras
that are detected.
132