Uniden EXAI 7248 SERIES Owner's Manual page 49

Remote Access with the Handset
You can operate your answering system from another room using a handset.
• If you press the end key before the answering system answers, the phone will return to
standby.
• If the answering system does not answer within five seconds, you hear beeps and the
phone will return to standby.
• The base's keypad is disabled during remote operation.
• If you receive a call, the remote operation is canceled.
• During the remote operation [ - - ] appears on the base.
• If you have new messages and old messages, only the new messages will be played. After
you have reviewed your new messages, you can play your old messages by pressing the
/2 key again.
1) With the phone in standby mode, press the select/remote key on the handset.
Ans wer ingM ach ine op era tio n
the current time and the number of messages stored in the memory.
2) You hear "To play incoming message, press two. For help, press zero."
You hear intermittent beeps.
3) Enter a command within 15 seconds. You may select a command from the following chart:
Command
Repeat a Message
/1
/2 Play Incoming Messages
/3 Skip a Message
/4 Delete a Message
w w w . u n i d e n . c o m
appears on the display. The answering system announces
Function Command Function
Stop Operation
/5
6 Answering System On
9 Answering System Off
0 Voice Prompts
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 4 8 ]
R emo te