Checking The Remaining Internal Memory And Card Memory - Uniden UDC-5M Instruction Manual

CHECKING THE REMAINING INTERNAL MEMORY AND CARD MEMORY

You can check the possible number of images and video clip recording time
remaining on the card. For a table showing the maximum number of images
and recording time for the internal memory and for a specific card, please see
"Possible Number of Images/Video Recording Time" on page 122.
1
Press the on/off button to turn the
camera on.
<To check the remaining number of
still images>
Set the shooting mode to the still
image shooting mode (page 26).
<To check the remaining video clip
recording time>
Set the shooting mode to the video
clip recording mode (page 26).
h The remaining recording time is
shown on the monitor.
h The remaining number of images
and video recording time will differ
depending on the resolution setting.
HINT
i When the remaining number of images
or the remaining video recording time is
"0", you cannot capture any more images. To capture more images, either
install a new card, or save the images to a computer and then erase them
(page 34) from the card.
i When the remaining number of images or the remaining video recording
time is "0", it may be possible to capture a few more images by changing
the resolution setting or video clip mode setting (page 51).
i The maximum number of images is 9,999, and the maximum video
recording time is 99:59:59. Note that if a large-capacity card is used, the
remaining number of images or recording time may not be correctly
displayed.
87
English
Remaining number of images
<Still Image Shooting Screen>
Remaining recording time
<Video Clip Recording Screen>
12
00:00:25