Uniden UDC-5M Instruction Manual page 105

DIRECT PRINTING
3
Select "PictBridge", and press the
ok button.
h The screen to select the images to
print appears.
CAUTION
Caution when connecting a printer.
i If the power to the printer is turned off while it is connected, the camera
may not operate correctly. If the camera does not operate correctly,
disconnect the USB Cable, turn off the camera, and then reconnect the
cable.
i During PictBridge printing, the camera's button operation response is
slower.
i Make sure that the remaining battery charge is sufficient.
Insert and pull out the cable carefully.
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
99
English
Print this image? Print this image? Print this image?
COPIES 1
PRINT
PRINT PRINT PRINT
OK