Viewing Still Images - Uniden UDC-7M Instruction Manual

Viewing still images

The steps for viewing both single shots and sequential shots are the same.
5
Press the playback button [=].
h If the playback button [=]
was pressed to turn the
camera on, however, press
the playback button [=] for
at least 1 second.
h The image most recently
captured appears on the
monitor.
6
View other images.
h Press the [l] or [m] button to
display the previous or next
image.
To display the previous
image:
Press [l].
To display the next image:
Press [m].
h To return to Shooting Screen,
press the playback button
[=].
<If the camera was turned on
by pressing the playback
button [=]>
h When the playback button
[=] or on/off button is
pressed, the camera turns off.
When you are finished viewing images...
i Press the on/off button to turn the camera off.
HINT
For still images with voice memo (page 44)...
i When the shutter button is pressed, the voice memo is played back.
Playback button [=]
[l] and [m] buttons
2006.12.24 2006.12.24 2006.12.24
100-0001 100-0001 100-0001
32
English