INSTALL THE BATTERY PACK AND CARD
1
Insert the battery pack and card.
h The card can be used after it has been formatted with the camera
(page 91).
h Make sure that the battery pack and card orientation are correct.
h When inserting the battery pack, be careful of the latch that secures it.
1
Open battery/card compartment cover on the side of the camera.
2
Uniden
logo
Insert the battery pack.
4
* To remove the card...
<Battery pack>
1 Open
3Pull out
[o] mark
Close the battery/card compartment cover.
2 Press the latch down
tor release the lock
3
Insert all the way until it clicks.
<Card>
1 Open
2 Push down,
then pull out
Contact end
16
English