Table of Contents
Advertisement
Chapter 2
Installing the VP-II Scanner
The VP-II Scanner must be installed in a place where it will not be
exposed to direct sunlight. Reflected sunlight may interfere with the
system, as well. High humidity, rain, and excess dust may interfere
with the functioning of the VP-II system; install the Scanner away
from such elements.
Do not install the VP-II Scanner where the floor is inclined.
Install the VP-II Scanner at a height of 1015-1045mm from the floor
and 100mm from the doorframe. If there is a wall beside the door,
VP-II Scanner should be at least 200mm apart from the wall.
100mm
Door
200mm
Wall
1015~1045mm
Floor
Put the bracket on the place for installing the VP-II Scanner and
make a hole after checking the hole location for cabling. Fix the
bracket on the wall using the bracket screws.
Power must be applied only after finishing all connections. Do not
perform any disconnection or connection after power is applied.
5
Advertisement
Table of Contents
