Chapter 6
If the VP-II M system is to be connected to a host PC, the VP-II
Controller must be connected to a VP-II Converter.
Cabling for the VP-II Controller and the host PC is shown in the
following figure.
For the RS-232 cables, use the cables provided by the Techsphere. To
extend the connection cable, see the VP-II Converter installation
guide (extension to maximum 15m is allowed).
1.3 RJ-45
1.2 DB9
12
Connecting the VP-II Converter
VP-II Controller
VP-Ⅱ Ⅱ Ⅱ Ⅱ Converter
VP-II Data Repeater must be used for the
distance longer than 100m.
host PC