Low Battery Indicator - Uniden XC600/700 Owner's Manual

Continuous Battery Charging
For the best battery performance, return the
Handset to the Base Unit at the end of the day. This
keeps the battery fully charged, so your phone
works best.

Low Battery Indicator

When the Battery
Pack in the Handset
is very low and needs
to be charged, the
TALK/BATT LOW
flashes.
If the TALK/BATT LOW
is programmed to eliminate its functions to save
power. The table below describes what to do to
return your phone to normal operation.
During a Call
A
Only the
operates.
The Handset beeps and
the TALK/BATT LOW
flashes once every 3
seconds.
Complete your call as
quickly as possible.
Return the Handset to
the Base Unit for
charging.
Note: Allow 15 to 20 hours without any interruption
for the Handset to fully recharge.
LED
LED begins to flash, the phone
button
LED
25
talk
talk
batt low
2
1
abc
5
4
ghi jkl
7 8
pqrs
tuv
In Standby Mode
None of the buttons will
operate.
The Handset
LOW LED flashes once
every 3 seconds.
You will not be able to
make a call.
Return the Handset to
the Base Unit for
charging.
flash/rdl
3
def
6
mno
9
wxyz
TALK/BATT