4. Press the memory
location number (0-9).
Chain Dialing
On certain occasions, after dialing a number, you
may be requested by the party or service you are
calling to enter a special access code, such as when
performing a banking transaction. To do this,
simply:
1.
2.
Dial the main number.
3.
At the appropriate time, press @ followed by
the memory location number where the access
code is saved.
Erasing a Stored Number
To erase a number previously stored in a memory
location (0-9), follow these steps:
1.
Remove the Handset
from the Base Unit.
32
Press @ twice.
2.
3. Press the memory
location number (0-9).
Note: An error tone will sound and the erase
procedure will be canceled if more than 2 0
seconds elapse between each keystroke
entry or step,
33