Table of Contents
Advertisement
Notes:
. If you receive a call while you store
a
number
in
memory,
press
TALK/HANG
UP to answer the call.
After the call, begin again at Step 2
to store the number.
.
For each number you store, write
the person's or company's name
next to the appropriate location
number on the memory index card.
Use a pencil in case you later store
a different number.
.
To delete a number from memory,
repeat all steps except Step 3 in
"Storing a Number in Memory."
Dialing a Memory
Number
Follow these steps to dial a number
stored in memory.
1. Lift the handset from the cradle, or
press TALK/HANGUP.
2. When you hear a dial tone, press
P1, P2, or P3 for one-touch dialing,
or press MEMOand then enter the
memory-location code.
CHAIN-DIALING MEMORY
NUMBERS
When you use special services, such
as alternate long-distance or bank-by-
phone, you can store the service's
phone number in one memory loca-
tion, your security code (if you have
one) in another location, and any
other numbers, such as the long-dis-
tance number, in a third location. This
lets you easily dial a long sequence of
numbers.
10
Note:
To prevent unauthorized ac-
cess to your account, we recommend
that do not write down the memory lo-
cation code for your security code on
the memory index card.
To chain-dial memory numbers, follow
these steps.
1. Press MEMOand the memory-loca-
tion code (or press P1, P2, or P3)
for the service's main number.
2. Wait for the computer tone after
the service answers.
3. Press MEMOand the memory-loca-
tion code (or press P1, P2, or P3)
for your security code (if neces-
sary).
4. Press MEMOand the memory-loca-
tion code (or press P1, P2, or P3)
for the remaining numbers.
Note:
If you use pulse dialing, re-
member that
you
need to
set
TONE/PULSEto TONE or press the
key under P1 before you store num-
bers you want to memory-dial after
you reach the special service.
Advertisement
Table of Contents
