2)
Use the base number keypad to enter the phone number that you would like to store (up to twenty digits). If
you need the phone to pause during dialing, press [redial/pause] to insert a two-second pause. You can insert
multiple pauses to increase the time; each pause counts as one digit.
[memory] again, and then press the number key [0] to [9] you want to use when dialing this phone
3)
Press
number. You will hear a confirmation tone.
Note: If there is already a speed dial number saved to that number key, the phone number will be overwritten.
To delete stored numbers from the base speed dial memory:
1)
With the phone in standby, press
2)
Press the number key
confirmation tone.
Customizing Your Phone
Selecting a Ring Tone (Handset only)
You may choose from four melodies or three tones for your
phone's primary ring tone. Each handset can use a different
ring tone or melody. The available ring tones are as listed:
1) Press [menu/clear]. Select the HANDSET SETUP menu, and then the
RINGER TONES submenu.
2)
Move the cursor to select a ring tone. As each ring tone is highlighted, you will
hear a sample.
3)
When you hear the tone you want to use, press
confirmation tone.
[memory] on the base twice.
[0] to [9] that contains the speed dial number you want to delete. You will hear a
[select/
Fur Elise (ELISE)
We Wish You A Merry
Christmas (MERRY-XMAS)
Melodies
Aura Lee (AURA LEE)
Waltzing Matilda
(W MATILDA)
]. You will hear a
25
Flicker
Tones
Clatter
Wake Up