Tone.dialing.switch.over - Uniden TRU9280 Series Owner's Manual

Answering an Intercom Page
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.handset.that.is.paging.
) Press.[ /flash].or.[hold/int'com/xfer]..If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.
you.remove.the.handset.from.the.cradle.
2) To.hang.up.an.intercom.page.from.the.handset,.press.[ ].
Tone Dialing Switch Over
If.your.phone.is.set.to.pulse.dialing,.you.can.temporarily.switch.to.tone.dialing.after.the.call.connects..This.feature.
is.useful.when.you.need.tone.dialing.to.use.automated.menu.systems,.such.as.telephone.bank.tellers,.telephone.
prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press [
on.the.handset..Any.digits.you.enter.from.then.on.will.be.sent.with.tone.dialing..When.this.particular.call.ends,.the.
phone.automatically.returns.to.pulse.dialing.
See.Changing.the.Dial.Mode.on.page.6.for.instructions.on.setting.your.phone.for.pulse.or.tone.dialing.
35
*
/tone].