Table of Contents
Advertisement
Mute Microphone
You can temporarily turn Off the microphone so that the person you are
talking with cannot hear you.
• If you press end to
With the handset
cancel muting, the call
During a telephone call press and hold menu/mute to turn Off the
is disconnected and the
phone will return to
microphone, and "
standby mode.
again to cancel muting.
• If you press xfer/del
With the base
on the handset or
find handset/transfer
During a telephone call press mute on the base to turn Off the
or flash on the base
microphone. Speaker LED on the base flashes. Press mute again, or
while muting, the
press
muting is canceled.
Tone Dialing Switch-over
• The tone feature only
applies when the dial
Some telephone companies use equipment that requires pulse dialing
mode is set to pulse.
(sometimes referred to as rotary dialing). If you need to enter tone dialing
• This special number can
digits, you can switch-over to tone dialing during the call. For example,
be stored in a memory
entering your bank account number after you have called your bank.
location. This is referred
to as Chain Dialing. (See
Initially make your call with the pulse dialing mode. Once your call
page 34.)
connects, press
sent as tone dialing. Once the call ends, the tone mode is canceled and
pulse dialing mode resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise increases.
If you pass the range limits of the base unit, your call will terminate within 30 seconds.
[ 22 ]
B A S I C S
Mute
" appears on the display. Press menu/mute
(talk) to cancel muting.
/tone. Enter the desired number. These digits will be
Advertisement
Table of Contents
