Table of Contents
Advertisement
Operation
Making and receiving calls
• If you press talk/flash or spkr on the handset while the other handset is in use, you
will hear a beep and "
standby mode.
Only one handset can
• If you charge the second handset and pick it up at the same time when you pick the
establish a call.
original handset from the base, the call will be transferred to the second handset.
Security code
You can change the digital security code, only from the original handset.
Memory locations (Redial memory/Dynamic memory locations)
Memory locations in the original handset and the second handset are independent.
Page
If you press any key on a handset while paging, the paging sound from the other
handset will stop as well.
3-way conversation
You can initiate the 3-way conversation with the second handset. However, a 3-way
conversation cannot be conducted between the second handset, original handset, and
an outside call.
Caller ID
• When you receive a CIDCW during a call, the Caller ID information will not be displayed
or stored in the other handset. Each handset works independently when in this mode.
• To display CIDCW on the second handset, you must turn On the CIDCW or CW Deluxe on
the original unit.
TAD
Signs for the remote handset features (remote,
the TXC580.
Others
• You can't use or purchase the second handset as an alternative of the original handset.
• Save this owner's manual. The TXC580 owner's manual describes only the instructions
specific to the second handset. For detailed operation, refer to this owner's manual
(for TRU5885).
[ 56 ]
E X PA N D I N G Y O U R P H O N E
" will appear. The handset will return to the
Unavailable
,
, and
) are not printed on
Advertisement
Table of Contents
