Table of Contents
Advertisement
1.6 SWITCHING THE REACH AT-HOME ALARM ON
Connect the power lead and switch the mains supply on, the front light will flash
GREEN
for about 12 seconds...
1.7 SWITCHING THE REACH AT-HOME ALARM OFF
The Reach At-Home Alarm uses very little power and should always be left switched ON.
If it necessary to switch the unit OFF, follow the procedure below:
1. Turn the mains supply off and wait for the unit to announce...
2. Press and HOLD the
3. RELEASE the
GREEN O
4. The Reach is now switched off.
The telephone plugged into the Reach will still operate when the unit is switched off.
careline24.co.uk
GREEN O
button until the unit "beeps" once...
button and the unit will announce...
"Please check your
mains supply"
"Beep"
"Powering down"
6
RED
/
AMBER
/
Call Free: 0800 1808545
Advertisement
Table of Contents
