Unpacking The Reach At-Home Alarm - Careline 24 CL24 User's Installation Manual

1.1 IMPORTANT INFORMATION
The user's telephone MUST BE connected to the Reach
incoming line must not be used.
If the user has a DECT telephone the base station MUST BE at least 2 metres away from the Reach.
Failure to provide this separation may result in reduced range of personal pendants or other radio
devices.
All telephone equipment has a Ringer Equivalence Number (REN) which is used to calculate the
number of items that can be connected to a single telephone line.
A REN of 4 is the maximum allowed on a standard UK telephone line. The Reach has a REN of 1.
If the REN total of all equipment connected to a telephone line exceeds 4, the equipment may not
operate correctly. With different types of equipmentthere is no guarantee of correct operation even
REN1
if the REN is less than 4. Typically 1 or 2 standard telephones (REN1) can be used with the Reach.
Avoid using strong detergents or polish when cleaning the Reach unit or Touch pendant.
Wipe clean with a damp cloth and polish with a dry duster. Do not leave Reach unit in direct sunlight
or near a heat source.

1.2 UNPACKING THE REACH AT-HOME ALARM

The Reach At-Home Alarm is supplied with a Power Lead, a Telecom lead, a Touch pendant and a
wearing kit. A stand can be fitted if the unit is being mounted upright or a connector cover if it is
being placed flat. The stand/cover must be fixed with the screw provided.
Reach At Home Alarm Unit
Stand & Cover Screw
careline24.co.uk
Touch Pendant Pack Contents
Power Lead
Wearing Kit
2
TEL socket - a double adapter on the
Telecom Lead
Call Free: 0800 1808545