Setting Caller Id Options - Uniden TRU4485 Series Owner's Manual

Setting Caller ID Options

There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call
Waiting), and Area Code. See page 16 for Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing talk/flash. If the phone rings
when AutoTalk is On, simply remove the handset from the base and the phone
automatically answers the call. Or if the handset is not on the base, press any number key,
*
tone, or # to answer the call. If you set AutoTalk to Off, you must press talk/flash to
answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call
waiting number. CW Deluxe allows you to handle call waiting calls in seven different ways.
(See page 39.)
You must subscribe to CIDCW from your phone company in order to use this feature.
The CW Deluxe is a separate service available through your phone company.
To change your Caller ID options:
1) When the phone is in the standby mode, press menu/mute.
2) Press + or - to move the pointer to "
then press select/ch.
3) Press + or - to choose "
press select/ch.
4) Press + or - to change the selection.
AutoTalk: "
CIDCW: "
5) Press select/ch and a confirmation tone will sound. To complete
the setting, make sure to return the handset to the base.
" or "
" or "
", " " or "
",
", then
"
"
G E T T I N G S T A R T E D [ 15 ]