Advertisement
Step 2
Using WPS
1
More than 5 seconds
WPS
ON
2
Wi-Fi
Zyxel EMG6726-B10A
Connect
Step 3
Quick Start Wizard
http://192.168.1.1
Username :
admin
Password :
Refer to the device label
(default)
EMG6726-B10A
Username
admin
Password
XXXXXXXX
Login
Troubleshooting
The EMG6726-B10A doesn't turn on.
- Make sure you are using the power adaptor or cord included with the EMG6726-B10A.
- Make sure the power cable is connected.
- Make sure the power adaptor is connected to an appropriate power source. Make sure the power source is
turned on.
I cannot see or access the Login screen in the Web Configurator.
- Make sure you are using the correct IP address.
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, you have to reset the EMG6726-B10A to its factory
defaults.
- Check the hardware connections, and make sure the LEDs are behaving as expected.
- Make sure your Internet browser does not block pop-up windows and has JavaScript enabled.
- Make sure you have entered the Username and Password correctly.
The default Username is admin, and the default Password is assigned randomly (on the device label). If this
does not work, you have to reset the EMG6726-B10A to its factory defaults.
I cannot access the Internet.
- Check the hardware connections and the LED behavior.
- Make sure you entered your ISP account information correctly.
- If you are trying to access the Internet wirelessly, make sure that you enabled the wireless LAN in the
EMG6726-B10A and your wireless client. Make sure you use the same wireless settings in the wireless client
and the EMG6726-B10A.
- Disconnect all the cables from your EMG6726-B10A and reconnect them.
2/2
Amber
Blinking
- The EMG6726-B10A is
connecting to 2.4GHz WiFi via WPS.
2.4G
Green
On
- 2.4GHz or 5GHz WiFi is ready.
Amber
Blinking
- The EMG6726-B10A is
connecting to 5GHz WiFi via WPS.
5G
Green
On
- 2.4GHz or 5GHz WiFi is ready.
within
2
minutes
WiFi
WPS
setup
OR
Android Only
Default IP Address :
192.168.1.1
Administrator Username :
admin
Administrator Password :
XXXXXXXX
Welcome to Quick Start wizard
Time Zone
Back
Next
Close
EN
Using WPS
1
Press the WPS button until the WiFi 2.4G and/or 5G LEDs light up in amber.
The WiFi 2.4G and 5G LEDs light up in green when a 2.4G and/or 5G wireless network is
ready.
2
Press the WPS button on the client. If the WPS method fails, perform the Using SSID
method.
Open a web browser and go to http://192.168.1.1.
EN
Enter the default Username (admin) and admin login password (on the device label),
and then click Login.
A wizard runs. Follow the wizard prompts to complete the setup.
Safety Warnings
• DO NOT use this product near water, for example, in a wet basement or near a swimming pool.
• DO NOT expose your device to dampness, dust or corrosive liquids.
• DO NOT store things on the device.
• DO NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock
from lightning.
• Connect ONLY suitable accessories to the device.
• DO NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage
points or other risks.
• ONLY qualified service personnel should service or disassemble this device. Please contact your vendor
for further information.
• Make sure to connect the cables to the correct ports.
• Place connecting cables carefully so that no one will step on them or stumble over them.
• Always disconnect all cables from this device before servicing or disassembling.
• Please use the provided or designated connection cables/power cables/ adaptors. Connect it to the
right supply voltage (for example, 110V AC in North America or 230V AC in Europe). If the power adaptor
or cord is damaged, it might cause electrocution. Remove it from the device and the power source,
repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one.
• DO NOT remove the plug and connect it to a power outlet by itself; always attach the plug to the power
adaptor first before connecting it to a power outlet.
• DO NOT allow anything to rest on the power adaptor or cord and do NOT place the product where
anyone can walk on the power adaptor or cord.
• DO NOT use the device outside, and make sure all the connections are indoors. There is a remote risk of
electric shock from lightning.
• CAUTION: Risk of explosion if battery (on the motherboard) is replaced by an incorrect type. Dispose of
used batteries according to the instructions. Dispose them at the applicable collection point for the
recycling of electrical and electronic equipment. For detailed information about recycling of this
product, please contact your local city office, your household waste disposal service or the store where
you purchased the product.
• DO NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.
For example, do not place the device in an enclosed space such as a box or on a very soft surface such
as a bed or sofa.
• The following warning statements apply, where the disconnect device is not incorporated in the
equipment or where the plug on the power supply cord is intended to serve as the disconnect device,
– for permanently connected devices, a readily accessible disconnect device shall be incorporated
external to the equipment;
– for pluggable devices, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
- Caution! The RJ-45 jacks are not used for telephone line connection.
Advertisement
