Philips Respironics E30 User Manual page 31

Device settings
Choosing this screen will take you to a sub-menu where you can adjust the way the device
displays information. These settings are described here.
Note
Not all settings shown here will display on the device. The display will vary based on therapy device
model and device settings.
Icon Text
Language
Clear Default
Reminders
Reset Data
Reset Blower
Hours
Reset Therapy
Hours
Provider Lock
Info Screens
Choosing this screen will take you to a sub-menu where you can view information on patient
usage.
Return to Patient Mode
Choosing this screen will exit Provider mode and the device will return to the Patient mode
if Provider mode is locked. Provider mode will also time out after 5 minutes of inactivity and
automatically return to the Patient mode if Provider mode is locked.
Note
This screen will not appear if Provider mode is unlocked.
Description
This feature allows you to choose which language to display on the
interface.
Setting not applicable to Philips Respironics E30.
Use the Reset Data function to clear patient data from the therapy
device. After you press the control dial to execute Reset Data, the device
will display a message asking you to confirm the reset. Press the control
dial again to reset data in the device.
Note: Reset Data resets blower hours that are visible to the patient, but
it does not reset machine hours in the Provider Menu.
Select Yes if you want to reset the blower hours (e.g., to track device
usage between patients).
Select Yes if you want to reset the therapy hours back to the default of
0 hours.
This setting locks or unlocks Provider mode.
Philips Respironics E30 User Manual
Device setup 25