Using Your Phone
Making and Receiving Calls
The following features of the EXS9005 phones are different depending on
the Handset's location when you make or receive a call.
Handset On Base Unit
ANSWER CALL
Pick up Handset (AutoTalk).
1) Pick up Handset.
2) Press
MAKE CALL
3) Listen for dial tone.
4) Dial the number.
Press
talk
— OR —
HANG UP
Return Handset to Base Unit. (AutoStandby)
1) Pick up Handset.
2) Press
REDIAL
3) Listen for dial tone.
4) Press
j
Sometimes when you press
tone and the phone will not disconnect. If this happens, place the Handset
on the Base Unit or press
Base Unit.
Flash and Page/Find
To access call waiting while the phone is in use or to use the one-way page to
locate the Handset, follow these steps:
If the call waiting tone sounds,
press
flash
call and put the first coll on hold.
FLASH
— OR —
If you have finished a call and
want to make another call,
press
flash
get a dial tone.
PAGE/FIND
Press
page/find
Unit to locate the Handset.
EXS9005
.
talk
.
.
talk
.
redial
to hang up the phone, you may get an error
talk
again while holding the Handset close to the
talk
Press These Keys
to accept the waiting
to hang up and
on the Base
Handset Off Base Unit
Press
.
talk
1) Press
.
talk
2) Listen for dial tone.
3) Dial the number.
1) Press
.
talk
2) Listen for dial tone.
3) Press
.
redial
You Will Hear
A click, a short pause, then the
caller (if you were on a call).
— OR —
A click, and then a dial tone so
you can make a different call.
The Handset will beep about
14 times.
23