Safety Regulations - SEH ProMAX Quick Installation Manual

Usb dongleserver
Table of Contents

Advertisement

Available languages

Available languages

 Safety Regulations
UTN servers are network devices for use in office environments. The
dongleserver ProMAX is designed for the integration of USB dongles into TCP/IP
networks.
Important:
Before starting the installation and the initial setup
procedure as well during the operation of the UTN
server, note the following safety regulations. Their
purpose is to protect yourself and others from personal
injuries, and to avoid damage to the equipment.
• Read the documentation and make sure that your system meets the require-
ments listed therein.
• Avoid contact with humidity or liquids.
• The device must only be connected and operated if it is in perfect condition.
• Make sure that no-one steps on or stumbles over the cables.
• If the supplied power cord cannot be used in your country, acquire an appro-
priate power cord that suits national provisions. For more information, con-
sult your retailer.
• The device must be connected to a socket with safety contact.
• Position the device in a way that guarantees that the socket for the connec-
tion of the power cord is in the proximity of the device and is easily accessi-
ble. Make sure that the device can be separated easily from the mains. A
damaged power cord must be replaced immediately. For more information,
consult your retailer.
• Do not connect a telephone cable to the RJ-45 connector. The RJ-45 connec-
tor may only be connected to SELV voltages. For the connection to the RJ-45
connector only STP cabling (category 5 or better) may be used. The shielding
must fit flushly to the connector.
• Do not open the housing. Unauthorized modifications to the device can af-
fect the product certification and are forbidden.
• The device must not be directly connected to outdoor lines.
• Electrostatic discharges (ESD) may impair device performance.
• An interruption of the supply voltage may impair device performance or
cause malfunctions.
• Disconnect both power cords in order to put the device into a zero-potential
condition.
7
[en]
Quick Installation Guide

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProMAX and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents