1) When the phone is in standby mode, press and hold
cid/menu. The following screen appears.
2) Press 4 or press
3) Press select to toggle between ¨
each setting.
4) Press end or return the handset to the base unit. The handset returns to standby
mode.
• If you are not sure of your dialing system, set for tone dialing. Make a trial call. If
the call connects, leave the setting as is. Otherwise set for pulse dialing.
• If your phone system requires pulse dialing and you need to send the DTMF tones for
certain situations during a call, you may "switch over" to tone dialing. (Refer to
"Tone Dialing Switch over" on page 19.)
Setting the Language
1) When the phone is in standby mode, Press and hold cid/menu.
The following screen appears.
2) Press 5 or press
3) Press select to toggle between ¨
setting.
4) Press end or return the handset to the base unit. The handset returns to standby
mode.
[ 16 ]
G E T T I N G S T A R T E D
three times to select ¨
¨ and ¨
Tone
four times to select ¨
Language
¨ and ¨
Eng
¨.
Dial
¨ for
Pulse
¨.
¨ for each
Fr.