Uniden EXI 386 Series Owner's Manual page 12

900mhz with caller id/call waiting
Table of Contents

Advertisement

Even when the battery
pack is not being used,
it will gradually
discharge over a long
period of time. For
optimum performance,
be sure to return the
handset to the base unit
after a telephone call.
[ 10 ]
G E T T I N G S T A R T E D
Low Battery Alert
When the battery pack is very low and needs to be
charged, the phone is programmed to eliminate functions
in order to save power. If the phone is not in use,
¨
¨ appears on the LCD and none of the keys
Low Battery
will operate.
If the phone is in use, ¨
display and the handset beeps. Complete your
conversation as quickly as possible and return the handset
to the base unit for charging.
The last number dialed in the redial memory and the
names and the numbers stored in the memory locations
are retained for up to 30 minutes while you replace the
battery pack.
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the
charging contacts on both the handset and base unit
once a month. Using water only, dampen a cloth to
clean the charging contacts. Then make sure to go
back over the charging contacts with a dry cloth
before returning the handset to the base to charge.
Do not use paint thinner, benzene, alcohol, or other
chemical products. Doing so may discolor the surface of
the telephone and damage the finish.
Low Battery
¨ appears on the
contacts

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exi386mExi386pExi386s

Table of Contents