Before You Begin - Cisco 6901 Manual

Wall Mount Components for Cisco Unified IP Phone 6911
Step 5
Change the handset as described in
Wall Mount Components for Cisco Unified IP Phone 6911
The following section describes how to install the wall mount for use with the Cisco Unified IP Phone 6911.
The following figure shows a list of items included in the Wall Mount Kit for the Cisco Unified IP Phone
6911.
Figure 6: Wall Mount Kit for Cisco Unified IP Phone 6911
The package includes the following items:
• One phone bracket
• One wall bracket
• Four #10-12x1-inch Phillips-head screws with 4 anchors
• Two #4-40x1/4-inch machine screws
• One 6-inch Ethernet cable
• One key if the bracket includes the optional lock

Before You Begin

You need these tools to install the bracket:
• #1 and #2 Phillips-head screwdrivers
• Level
You must also install an Ethernet jack for the telephone in the desired location if an Ethernet jack does not
currently exist. This jack must be wired appropriately for an Ethernet connection. You cannot use a regular
telephone jack. For more information on phone installation requirements and warnings, see
Phone
Cisco Unified IP Phone Wall Mount
4
Installation.
Adjust Handset Rest, on page
Cisco Unified IP Phone Wall Mount
9.
Cisco Unified IP