Table of Contents
Advertisement
Once the handset battery packs are fully charged,
3
use the telephone cord to connect the TEL LINE jack
to a telephone wall jack.
Charge both handsets at least
15 to 20 hours before you plug
in the phone cord.
Note:
•
Do not place the power cord where it creates a trip hazard or
where it could become chafed and create a fire or electrical
hazard.
•
If the telephone cord does not fit into your telephone wall jack,
contact your local phone provider for assistance.
Registering Handsets to the Base
Whichever handset you choose to charge in the base is automatically
registered to the base. Any additional handsets must also be registered to
the base before you can use them.
)
Be sure both handsets are fully charged.
2)
One at a time, place each handset in the base. The charge/in use LED on
the base begins to flash, indicating the base is registering the handset.
3)
Wait for at least five seconds, then pick up the handset and press
[talk/flash]. If the display shows TALK, the handset is registered. If not,
place the handset in the base to try again.
4)
Press [end] and continue with the next handset.
Note:
•
Once both handsets are registered, it doesn't matter which
handset is placed in the base or the charger.
•
When you charge the handsets, Caller
ID summary screen and the name of
the handset appears.
Mounting the Base on a Wall
You can mount the phone on any standard telephone jack wall plate.
)
Snap the wall mount adapter into the
notches on the base top.
2)
Plug the AC adapter to the DC IN 9V jack.
3)
Plug the AC adapter into a standard 20V
AC outlet.
4)
Plug the telephone cord into the TEL LINE
jack.
)
Route the telephone cord through the
molded wiring channel as shown.
)
Plug the telephone cord into the telephone wall jack.
7)
Align the mounting slots on the
base with the mounting posts on
the wall. Then push in and down
until the phone is firmly seated.
Note: To mount the phone
directly on the wall, insert
two 1
/
inch, #10 screws (not
3
8
supplied) into the wall using
anchors suitable for the wall
material. Place the screws 3
inches apart, and allow
free space between the wall and
screw heads.
4) Setting Up Your Phone
There are five basic options that you will need to set up: Display Language,
Dial Mode, CIDCW (Caller ID on Call Waiting), Area Code, and AutoTalk.
CIDCW and Dial Mode options can only
be changed from Handset .
(Handset shows HS1 on the screen
while the phone is charging.)
AutoTalk, Area Code and Language options
can be changed from any handset.
Setting the Language
You can change the language the handset menu displays. Choose from
English (ENG), French (FR), or Spanish (ESP).
)
With the phone in standby, press and hold [cid/menu].
2)
Press [vol/ / ] to move the pointer to select LANGUAGE.
Press [select/channel] to select ENG, FR. or ESP.
3)
4)
Press [end] to complete the setting. The handset returns to standby.
Note: To change the language used by the answering system, see
Section 9, "Setting Up Your Answering Machine".
To telephone wall jack
Telephone cord (supplied)
/
15
16
/
inch
1
8
Total:00
Total:00
7
7
6
6
7
7
ｰAuto Talk
ｰAuto Talk
CIDCW
CIDCW
Area Code
Area Code
Dial
Dial
Language
Language
Scroll
Scroll
(Handset 1)
(Handset 1)
ｰAuto Talk
ｰAuto Talk
Area Code
Area Code
Language
Language
To TEL LINE
HS1
HS1
1 1
2
2
4
4
5
5
3
3
:Off
:Off
:On
:On
:
:
:Tone
:Tone
:Eng
:Eng
:Off
:Off
:
:
:Eng
:Eng
Advertisement
Table of Contents
