Uniden DXAI388-2 Owner's Manual page 49

Setting Your Outgoing Message (Greeting)
When you receive a call, the answering system automatically plays either a preset
message or your own greeting.
M Preset message
The following message is prerecorded:
"Hello, no one is available to take your call. Please leave a message after the tone."
See "Selecting the message record time", page 45 how to set the announce only feature.
M Recording a personal outgoing message (Greeting)
1) Press and hold greeting.
You hear the announcement "Record greeting" and a confirmation tone.
[ ] flashes on the message counter.
2) Start recording your message. You have 30 seconds, and the message counter
starts to count down [
3) When you are finished recording your greeting, press greeting or play/stop.
You hear a confirmation tone, and then your greeting plays back for you.
M Choosing between the two outgoing messages
Press greeting. Then press greeting again when the outgoing message is played. This
switches between the prerecorded greeting or the personal greeting. After finishing
playing back the message, a confirmation tone is heard.
To delete the personal Greeting, press delete during the announcement and the system announces
"Greeting has been deleted".
] to [ ] every second.
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
• You can record a
greeting up to 30
seconds long.
• Position yourself as
near to the main base
as possible and speak
clearly when
recording your
outgoing message.
[ 47 ]